Materials to be cut: Rigid PVC foams and similar materials
Technical Data:
Working width (mm): 1400 [55.1"],
1600 [63"], 2000 [78.7"]
Table length (mm): 2400 [94.5"]
extendable by n x 1200 [47.2"]
Bandsaw (mm): 15 x 1 [0.59 x 0.04"]
Bandsaw speed (m/s): 50 [164'/s]
Feed. speed (m/min): 1-20 [3.3-66'/min]
Return speed (m/min): 20 [66'/min]
This special bandsaw allows for the sawing of rigid PVC foam blocks into various layer thicknesses. The rigid foam block is put onto a vacuum table which is sliding silently on hardened and ground steel bands. The drive is realized via rack and an adjustable table drive.
Depending on the length of the vacuum table the respective number of blocks can be loaded onto the table. The sawn layer has to be taken off after each cut. In order to facilitate this procedure, it is possible to program a respective waiting time in the range of 0,5 and 10 seconds after the cut. After the cut the sawing unit is lifted automatically in order to allow for a reverse run of the table.
