Machine: H 24 A Machine Type: Horizontal Splitting
Materials to be cut: Blocks and slabs made of expanded rubber ("Neoprene"), natural and synthetic rubber, sponge rubber, "EVA", PE foam and PVC flexible foam, furthermore cellular "Vulkollan" and similar materials with a Shore hardness in the range of 30-70 degrees Scale "A"
Table lengths (mm): 2400 [94.5"]
extendable by n x 1200 [47.2"]
Bandknife (mm): 60 x 1 [2.4 x 0.04"]
Feeding speed (m/min):
4-40 [13-130'/min]
The Fully Automatic Splitting Machine H 24 A is used to split blocks and slabs made of the above-mentioned materials economically into thin sheets. The slabs are put onto a vacuum table and are held in place by a vacuum system.
During the automatic feed of the table the block is split into the requested layer thicknesses. Depending on the length of the vacuum table the number of blocks to be cut can be varied. The cut layers are directly taken off after the splitting process.
